, FARO Technologies,
Inc.0, one can
use to instantly measure the distance between points, move in 3-D space and
create CAD models for practically any application.

NIST has supported AIAG by providing a test bed to validate DML and I++DME
with multiple CMMs, metrology software and hardware loaned to NIST by vendor
partners . NIST develops and promotes measurement, standards and technology to
enhance productivity, facilitate trade and improve the quality of life.

17025 unigraphics

0 include:

Noise Reduction and Simultaneous Volume Compression -- helps create high-
definition scans more quickly.

Free Downloadable Scan Viewer -- http://www.

Automatic Color Overlay -- The color option for the FARO Laser Scanner LS
uses a digital camera to overlay color pixels on the point-cloud data, which
is especially practical and timesaving when capturing large areas in color.com/cgi-bin/prnh/20040719/DEM007LOGO )
The DML specification is only one part of a broader AIAG effort supporting
open interface standards that efficiently communicate metrology information,
helping the automotive industry recover some of the time (up to six months)
and the approximately $600 million it loses annually to build and rebuild
measurement programs for different systems.

angled routinely

Ideal for large-volume modeling, factory
planning/redesign, quality control and forensics, it scans 120,000 points per
second -- up to 100 times faster than most time-of-flight scanners -- with 3mm
accuracy.

About FARO
With more than 9,100 installations and 4,100 customers globally, FARO
Technologies, Inc., Volkswagen , BMW, Audi, and Volvo),
the International Association of Coordinate Measuring Machine Manufacturers
(IA.aiag.

metrology workpieces

Automatic Object Fit -- Approximating a VRML object placed near the point
cloud enables a faster comparison of the object to the scan data.CMM), AIAG and NIST.
The demonstration linked proprietary hardware and software in a live
execution of part inspection -- using touch-trigger probing, scanning, part
alignment, and tool changing -- connecting Wenzel, Xspect Solutions and Zeiss
CMMs with software from LK, Metrologic, Metromec, Tecnomatix, Wilcox
Associates and Zeiss.

sqa geosystems

This helps eliminate manufacturing errors,
and thereby increases productivity and profitability for a variety of
industries in FARO's worldwide customer base. This
lack of interoperability also severely limits manufacturers' ability to
effectively build and operate measurement systems and often results in extra
time to reprogram dimensional measurement and inspection systems.

About AIAG
Founded in 1982, AIAG is a globally recognized organization where OEMs and
suppliers unite to address and resolve issues affecting the worldwide
automotive supply chain.

routinely photogrammetry

The result is an image so detailed that it looks like a black-and-
white photo, but in three dimensions that, thanks to FaroScene 3. DML will help connect
different measuring components from various systems within a plug-and-play
environment. Original equipment manufacturers
(OEMs) have been generally unable to require compliance to specific standards
because either no standards were in place or no conformance tests existed to
verify compliance to the standard.

kinematics vernier

New features for FaroScene 3.org .

qit unigraphics

-- that a common global language
specification for metrology system interfaces, called dimensional markup
language (DML), will be released in June. The demo also successfully transferred part geometry
and feature tolerance information from these software applications to analysis
software from Dimensional Control Systems, Tecnomatix and Mitutoyo. The team includes representatives from AIAG, NIST, DaimlerChrysler ,
Ford Motor Co.

molders unigraphics

The DML specification was developed by the AIAG Metrology Interoperability
Project Team, whose goal is to streamline the dimensional measuring function
at auto manufacturers , suppliers and tooling outfits throughout the supply
chain.

angled sqa

Using this feature, edged objects can be
easily extracted and used as the basis for modelling, then exported into other
CAD systems in VRML or IGES format.

metrication photogrammetry

newscom.
"AIAG and NIST, working together to address a billion-dollar plus
interoperability issue, demonstrate an industry-government partnership where
everyone benefits ," said Hratch G.

qit angled

, the world's only single source for a complete line of portable CAM2
solutions, announced the release of FaroScene 3. (Nasdaq: FARO) and its international subsidiaries design,
develop , and market software and portable, computerized measurement devices.
Defined as the science of measurement, metrology is used in the automotive
industry to improve dimensional integrity in vehicles .
Today's real-time demonstration showcased the robust capability of DML as
well as the I+ +DME open standard.

metrication sqa

Semerjian, acting director of NIST. AIAG's goals are to reduce cost and complexity
through collaboration; improve product quality, health, safety and the
environment; and optimize speed to market throughout the supply chain.

molders qit

"Since its launch last year, the new FARO Laser Scanner LS has brought
high speed and high definition to the world of scanning," FARO Chairman, Co -
CEO and Co-Founder Simon Raab said.

Edge Recognition -- This makes modelling in a CAD system as simple as
possible.

The type of companies listed here will include dimensional analysis of workpieces, training companies, CAD / CAM / CMM conversion companies etc.

ttb cmm

0 expand
our Company 's technological superiority beyond its traditional industrial base
to industries such as Tunnel Excavation , Mining, Historical Preservation,
Civil Engineering, as well as to the Forensic and Insurance Investigations ."
The FARO Laser Scanner LS empowers users to digitize massive spaces into
3-D, action-ready data. With meshing, unnecessary triangles are automatically eliminated, yet
the scan still retains surface texture, so the file size is smaller without
large segments of data being lost.

Visual Assessment of Registration Quality -- This gives the user a visual
appraisal of which measurements would improve the registration, thus taking a
further step toward intuitive quality improvement.

The Company's products allow manufacturers to perform 3-D inspections of parts
and assemblies on the shop floor.

angled caliper

AIAG developed DML in partnership
with the National Institute of Standards and Technology (NIST), a non-
regulatory agency of the Department of Commerce.
(Logo: http:/ /www.
These systems typically include CAD software, inspection program planning
and execution software, a coordinate measuring machine (CMM) and inspection
analysis software.

tolerancing cmm

FARO.

comparators metrology

FARO Technologies is ISO 9001 certified and ISO-17025
laboratory registered.

molders wassing

FARO Releases Advanced Software for Large -Volume Scanning

wuxi comparators

New AIAG Dimensional Metrology Specification Helps Eliminate
Redundant Measurement Programs for Different Systems

CHICAGO, The Automotive Industry Action Group
(AIAG) announced today -- at a proof-of-concept demonstration at the Quality
Expo Conference in Rosemont, Ill. "In
today's global environment, it is imperative that we adopt standardized
processes that enable true collaborations across continents."
AIAG's DML specification is a common method to effectively transmit
inspection results information, which addresses the current void of seamless
data exchange in dimensional metrology and inspection system operations.
Headquartered in the metro Detroit area, its more than 1,500 member companies
include North American, European and Asia-Pacific OEMs and suppliers to the
automotive industry.

vernier caliper

"The enhancements in FaroScene 3 . Principal products include the
FARO TrackArm; FARO Laser ScanArm; FARO Laser Scanner LS; FARO Gage and Gage-
PLUS; Platinum, Digital Template, Titanium, Advantage FaroArms; the FARO Laser
Tracker X and Xi; and the CAM2 family of advanced CAD-based measurement and
reporting software. One of the most
critical issues facing the industry today is the cost of integrating
proprietary dimensional measurement systems.

cmm caliper

LAKE MARY, Fla. The 3-D grayscale data of the point cloud is used to generate an
automatic edge model of the scan.
"The power to see a 3-D copy of the actual site, navigate through it and
make critical decisions without visiting the site is an important capability
for everyone from project managers in the construction industry, government
officials in disaster recovery , and even insurance adjusters performing damage
or risk assessments," FARO Director of LS Product Management Bernd Dietmar-
Becker said. and the product vendors named above.

workpieces micrometer

Meshing/Surface Triangulation -- Point-cloud information becomes faster
and often easier to handle as FaroScene creates a mesh of triangulated
surfaces from individual points, which can then exported into other CAD
systems .com/ScoutLT contains a
downloadable version of FARO Scout LT that enables users to navigate, export
points to other software systems and to make measurements within the scan. The I++DME standard is a development effort
of the I++DME Group (DaimlerChrysler Corp. Additional information is available on the Internet at
http://www.

sqa micrometer

"AIAG is the umbrella that the global metrology community worked under to
develop this important metrology interoperability standard, and today's
demonstration showcases the success of that collaboration," said Chuck Koehn,
AIAG acting executive director.

This category will list companies that provide Industrial Metrology services and Consulting services to manufacturing companies on the topic of Industrial Metrology.

cmm molders

0 software for its Laser
Scanner LS product.

AIAG's Metrology Interface Specification Could Save Industry Hundreds of Millions of Dollars

Companies
that transfer data for dimensional metrology and inspection system operations
will benefit from the use of open standards, such as DML.