" Initial
player testing of these new clubs has provided very positive feedback on
the improved "feel" that the putter provides over the competition. It also
provides a 55% reduced density, and 25% specific strength advantage over
titanium alloys, and a 75% reduced density compared to stainless steel.
Scandium's superior strength to weight ratio over these other metals has
allowed E21 to redistribute weight in the head of the putter to create a
larger sweet spot, which in turn provides substantial forgiveness on
miss-hits.

spinweld bilton

PRESS RELEASE Scandium Putter Unveiled by Element 21 Golf

In November 1997, Foose was inducted into the Hot Rod Hall of Fame, and in
2002, was inducted into the Darryl Starbird Rod + Custom Car Museum Hall of
Fame.

patana weldwire

Foose is the design genius
behind some of the most exciting cars on the road and is constantly setting
new design standards in the hot rod industry.

sparx mig

The new putter offers E21 a
winning solution to competing in this major market sector and establishes
another avenue to strengthen brand recognition for the company. Unknown
to many, steel shafts are welded creating a seam or spine not visible to
the eye. Viewers
of the show are also familiar with Foose Design, his Huntington Beach, Calif.
Our Lincoln plasma cutter is great too.

welders bilton

ellon bilton

Previews of
the new E21 putter head are available at
http: //www.
"I love Lincoln's Precision TIG with Micro-Start(TM) because you can get
right in there and see what you're working on before you start melting the
metal," said Foose.

weldable pipefitting

The E21 putter 's scandium metal alloy shafts are by themselves noteworthy.
In 1998, he opened Foose Design, an automotive and product design company
specializing in illustration, graphics, surfacing, and complete construction
of automobiles and automotive-related products.com.

electropolish welding

ca/media/e21_newport_putters. Scandium not
only provides significant increases in distance, but more importantly,
added accuracy and consistency.,
shop, equipped with only the best tools to translate design ideas into
reality . You can get into tight places with no
problem.

rizzato dinsmore

Scandium metal alloy clubs represents the first new innovation in material
composition of golf clubs to hit the industry in decades.

Forward -Looking Statements

Statements in this release, other than statements of historical fact, may
be regarded, in certain instances, as "forward-looking statements" pursuant
to Section 27A of the Securities Act of 1933 and Section 21B of the
Securities Exchange Act of 1934, respectively.

com
barthenyan@hotmail.
(Photo: http://www.

weldments normandin

The Lincoln Electric Company, Cleveland , Ohio, is a world leader in the
design and manufacture of arc welding equipment and consumables, robotic
welding systems, plasma and oxyfuel cutting equipment.

metalizing sparx

Element 21 Golf Company (E21 )
(OTC BB: EGLF) announced today the introduction of its new scandium putter
featuring a "traditional design.

scrapped ellon

The scandium putter shaft gives you the
same true "contact signature" feedback on your putts as you get in all of
the E21 line of clubs. The difference in the tube wall thickness at the point of welding
creates an imbalance, which affects the consistency of shots.com

Custom Hot Rod Designer Chip Foose Selects Lincoln Electric as Preferred Welding Supplier

"
Foose grew up working on hot rods under the watchful eye of his dad, the
owner of Project Design.

hardfacing weldments

e21. Scandium provides
greater accuracy and improved consistency from club to club. There can be no assurance that such statements will ever prove
to be accurate and readers should not place undue reliance on any such
"forward-looking statements" contained herein.

weldments bilton

They are superior in every respect to graphite and stainless steel shafts. CLEVELAND, Provocative designs and sleek curves
are the hallmarks of legendary hot rod designer and fabricator Chip Foose.

metalizing sparx

Due to the dynamic nature of the material ,
coupled with numerous design innovations, the E21 new line of clubs will
offer improved feel while reducing shock transfer to the player's hands.

patana shira

com/cgi-bin/prnh/20050817/CLW040)
Recently , after a side-by-side comparison, Foose replaced his former brand
of welding equipment to outfit his shop solely with Lincoln Electric MIG, TIG
and plasma equipment. "It has a much lower heat input , which gives you more
control and just an overall beautiful weld.

spinweld oxyfuel

"Forward-looking statements"
are based on expectations, estimates and projections at the time the
statements are made that involve risks and uncertainties which could cause
actual results or events to differ materially from those presently
anticipated.

pipefitting patana

The scandium metal alloy in both the shaft and putter face take advantage
of scandium's soft feel and spin reduction which translates to reduced ball
"skid" upon contact . "The feel is solid and the roll is true.

metalizing weldable

This category contains sites which provide all types of welding services (MIG, TIG, stick and flux) for businesses.

rizzato oxyfuel

About Element 21:

Element 21 is relying on its experience working with advanced scandium
metal alloys to introduce this unique space-age material to the golf
industry. All of our craftsmen love them.chipfoose.

welding brennans

" Putters constitute one of the largest
equipment segments in the golf industry today.
His work has already captured three Don Ridler Memorial Awards, one of the
most coveted trophies on the show car circuit.newscom . After graduating from the world-renowned Art Center
College in Pasadena, Foose spent eight years working for Boyd Coddington at
Hot Rods by Boyd, where he was responsible for many internationally known
vehicles, such as the Roadster, Sportstar, Boydster I and II, and Boyd Air.

ellon mig

Scandium's inherent metallurgical properties combined with a proprietary
25-step seamless production process results in a shaft that is nearly
perfectly symmetrical, unlike graphite and stainless steel shafts.

Media members interested in testing shafts or the E21 Scandium Performance
System clubs for an editorial review or receiving further information
please contact:

The Media Group
Joe Wieczorek or Bart Henyan
(847) 956-9090
joe@themediagroupinc. As the lead designer and
builder of the Discovery Channel series Overhaulin' that airs weekly on TLC,
Foose is a household name among those who tune in to see how he and his team
of technicians radically transform a car for its unsuspecting owner.

submerged weldwire

Citing a better arc and improved welding performance,
Foose and his fabricators are now taking advantage of the Lincoln Power
MIG(TM) 350MP and Power MIG 255 MIG welders, Precision(TM) TIG 275 and
Invertec(R) V205-T TIG welders and Pro-Cut(R) 55 plasma cutter.
For more information on Chip Foose, visit his web site at
http://www.

welding electropolish

php

The putter head incorporates a scandium metal alloy face insert, which is
milled for superior contact with the ball harmonizing the energy transfer .

welding spinweld

This allows the ball to begin rolling more quickly and
easily off the face of the club and provides enhanced distance control and
a more accurate ball trajectory. Similarly,
the production process for graphite shafts also results in inconsistencies
through the shaft with similar associated problems . Scandium alloys were originally developed for applications in
aeronautics; MiG series fighter jets and leading edge missile applications,
as well as the International Space Station.

hardfacing normandin

---

- - kjjkjk

Loading...

(Note: These pages use the Atlas Content Safeguard System (ACSS) and require that Javascript is enabled for viewing.)